MARMOCRYSTAL-CLEAN

MARMOCRYSTAL-CLEAN is a premium, crystal-clear daily maintenance cleaner specially formulated for the regular cleaning and hygiene care of natural stone, ceramic, porcelain, and architectural tile surfaces. Engineered with a gentle, pH-balanced formulation (7.0 ± 0.5) and low-VOC surfactants, MARMOCRYSTAL-CLEAN effectively lifts everyday dirt, dust, fingerprints, water spots, light grease, and household grime while preserving the natural beauty, vibrant color, mirror polish, and protective sealer finish of stone surfaces.

Supplied as a convenient, ready-to-use solution requiring minimal rinsing, MARMOCRYSTAL-CLEAN dries rapidly to deliver a crisp, streak-free appearance with zero sticky chemical residue. It is completely safe for frequent residential and commercial cleaning across polished, honed, brushed, and textured surfaces—including Italian marble, granite, limestone, travertine, vitrified porcelain tiles, kitchen countertops, bathroom vanities, and commercial hospitality lobbies.

Key Highlights

• Crystal-Clear, Ready-to-Use Formula: Pre-balanced cleaning solution designed for direct spray-and-wipe or mop application without complicated dilution steps.
• Gentle pH-Balanced Chemistry (7.0 ± 0.5): Strictly neutral formulation ensures zero chemical etching or dulling on delicate, acid-sensitive calcium carbonate stones like marble, limestone, and onyx.
• Streak-Free & Zero Sticky Residue: Fast-drying formula evaporates cleanly without leaving cloudy streaks, soap films, or tacky residues that attract dirt.
• Preserves Natural Polish & Sealers: Cleans effectively while safeguarding factory mirror shine, crystallized finishes, and sub-surface penetrating sealers (such as MARMOIMPREGNATOR and MARMOSEAL-W).
• Multi-Contaminant Daily Action: Effortlessly eliminates dust, fingerprints, food smudges, light kitchen grease, water spots, and everyday foot-traffic grime.
• Low VOC & Mild Odour: Environmentally responsible, low-odor formulation safe for enclosed indoor living spaces, food preparation counters, and occupied commercial buildings.
• High Coverage Efficiency: Covers 30 to 50 m² per litre depending on substrate porosity and surface texture.

Technical Specifications

Parameter / Property	Specification / Value
Product Name	MARMOCRYSTAL-CLEAN
Product Classification	Crystal-clear pH-balanced daily stone & tile maintenance cleaner
Physical Appearance	Crystal clear liquid
Density / Specific Gravity	1.00 ± 0.03 g/cm³
Viscosity	Low viscosity (fluid, sprayable liquid)
pH Level	7.0 ± 0.5 (Neutral / pH-balanced)
Flash Point	> 70°C (Non-flammable under normal conditions)
Odour	Mild characteristic
VOC Content	Low VOC
Solubility in Water	Completely miscible in water (100%)
Application Temperature Range	+5°C to +35°C (Ambient and surface temperature)
Dwell Time	2 – 3 minutes for stubborn dirt (up to 5 – 10 minutes based on grime thickness)
Theoretical Coverage Rate	30 – 50 m² per litre (depending on surface porosity and texture)
Cleaning / Removal Method	Wipe with clean microfiber cloth / soft mop and clean water rinse
Standard Packaging Sizes	1 Litre Bottle and 5 Litre Can
Shelf Life	12 months in original, unopened packaging
Storage Conditions	Store in a cool, dry place (+5°C to +30°C) away from heat and direct sunlight

Application & Handling

Substrate Suitability & Surface Preparation Compatible Substrates: Polished, honed, and textured natural stones (marble, granite, limestone, travertine, slate, quartzite), porcelain tiles, ceramic tiles, terrazzo, and concrete. Ensure the surface is dry and free from loose dust, sand, grit, and abrasive debris prior to wet cleaning. Always perform a small trial application on an inconspicuous area before large-scale use to confirm surface compatibility.

Application Procedure MARMOCRYSTAL-CLEAN is a ready-to-use solution. Apply directly onto the stone or tile surface using a trigger spray bottle, clean microfiber cloth, soft sponge, or microfiber flat mop. Routine Daily Cleaning: Spread evenly across the surface and wipe gently using a clean microfiber cloth or soft mop. Stubborn Dirt & Grime: Allow the cleaner to dwell on the surface for 2 to 3 minutes (extendable up to 5–10 minutes for thicker grime buildup) before wiping. Do not allow excessive liquid to dry on the surface. Agitation: Where necessary, use a soft scrub brush or microfiber pad to gently agitate and lift stubborn spots.

Rinsing & Finishing Clean the surface with clean potable water and wipe dry with a soft microfiber towel to remove any remaining suspended residue and achieve a brilliant, streak-free finish.

Do’s

• Sweep or vacuum loose dust and grit before applying the liquid cleaner.
• Use a clean microfiber cloth, soft sponge, or microfiber mop for optimal streak-free results.
• Perform a trial patch on an inconspicuous area before full-scale application.
• Wipe the surface uniformly to achieve a crystal-clear, streak-free finish.
• Use regularly to preserve the natural gloss and hygiene of stone surfaces.
• Keep the container tightly closed after every use and store in a cool, dry place.

Don’ts

• Do not mix with acidic, alkaline, bleach-based, ammonia, or solvent-based cleaners.
• Do not use abrasive scouring pads, steel wool, or metal wire brushes that scratch polished stone.
• Do not allow excessive product to puddle or dry completely on the surface.
• Do not apply onto excessively hot surfaces or under direct, scorching sunlight (> 35°C).
• Do not use for removing heavy post-construction cement residue, epoxy grout haze, rust stains, or heavy industrial contamination (use MARMOCLEANER-HEAVY or MARMORUST-REMOVER instead).
• Do not freeze the product or expose it to extreme thermal conditions.

Storage & Safety

Storage: Store in original tightly sealed packaging in a cool, dry location between +5°C and +30°C, away from direct sunlight and heat sources.

Handling: Use in a well-ventilated area. Wear protective gloves, eye protection, and protective clothing during handling to avoid skin and eye contact.

First aid:

• Skin Contact: Wash immediately with soap and clean water.
• Eye Contact: Rinse thoroughly with plenty of clean water and seek medical advice if irritation persists.
• Inhalation: Move to fresh air if feeling unwell; seek medical attention if symptoms continue.
• Ingestion: Do not induce vomiting. Seek medical attention immediately.
• Disposal: Follow local environmental regulations for the safe disposal of chemical products and containers.

Frequently Asked Questions

1. What is MARMOCRYSTAL-CLEAN?
MARMOCRYSTAL-CLEAN is a premium, crystal-clear, ready-to-use pH-balanced daily maintenance cleaner formulated for regular cleaning of natural stone and tile surfaces.

2. How does MARMOCRYSTAL-CLEAN differ from MARMOCLEANER-MILD?
MARMOCRYSTAL-CLEAN is a crystal-clear, ready-to-use spray/wipe daily cleaner requiring minimal rinsing (covering 30 – 50 m²/L), whereas MARMOCLEANER-MILD is a 1:20 dilutable cleaning concentrate designed primarily for large-area bucket mopping.

3. Is MARMOCRYSTAL-CLEAN safe for polished Italian marble?
Yes. Its strictly neutral pH (7.0 ± 0.5) ensures it will never etch, dull, or corrode calcium carbonate stones like Statuario, Carrara, Botticino, limestone, or travertine.

4. Does MARMOCRYSTAL-CLEAN leave streaks or smudges on glossy surfaces?
No. It is engineered with fast-drying, low-residue surfactants that evaporate cleanly, leaving polished marble, granite, and porcelain completely streak-free.

5. What types of everyday dirt does it remove?
It removes daily dust, surface dirt, fingerprints, water spots, light kitchen grease, food smudges, and general household grime.

6. Does MARMOCRYSTAL-CLEAN strip away stone sealers or wax polish?
No. Because it is pH-neutral (7.0 ± 0.5) and free of harsh solvents or alkalis, it preserves sub-surface impregnating sealers (like MARMOIMPREGNATOR and MARMOSEAL-W) and surface polishes (like MARMOSHINE-WAX).

7. Do I need to dilute MARMOCRYSTAL-CLEAN before use?
No. It is supplied as a ready-to-use solution that can be applied directly via spray bottle, microfiber cloth, sponge, or mop.

8. What is the recommended dwell time for stubborn spots?
For everyday dust and fingerprints, simply spray and wipe. For stubborn dirt or dried smudges, allow the liquid to remain on the surface for 2 to 3 minutes (up to 5–10 minutes for heavier grime) before wiping clean.

9. Can MARMOCRYSTAL-CLEAN be used on kitchen countertops and dining tables?
Yes. Its low-VOC, mild-odor, pH-balanced formula makes it ideal for daily hygiene and grease removal on granite, quartz, and marble kitchen countertops.

10. Is it suitable for honed, brushed, and textured stones?
Yes. It cleans polished, honed, leathered, brushed, and textured natural stones as well as ceramic, porcelain, and concrete surfaces without leaving trapped soap film.

11. What is the coverage rate per litre?
One litre of MARMOCRYSTAL-CLEAN covers approximately 30 to 50 m², depending on the porosity and texture of the stone.

12. Can MARMOCRYSTAL-CLEAN remove cement grout haze or efflorescence?
No. It is a gentle daily cleaner and is not formulated to dissolve hardened cement residue, epoxy haze, or mineral scale. For post-installation cement cleanup on acid-resistant stone, use MARMOCLEANER-HEAVY.

13. Can it remove deep rust stains?
No. Rust and metallic oxidation marks require a specialized chelating cleaner such as MARMORUST-REMOVER.

14. Why should abrasive pads or steel wool never be used during cleaning?
Abrasive scouring pads and wire brushes scratch polished stone surfaces and leave microscopic metal splinters that rust. Always use a soft microfiber cloth, sponge, or soft nylon brush.

15. Can I mix MARMOCRYSTAL-CLEAN with bleach or floor disinfectants?
No. Never mix it with acidic, alkaline, bleach-based, or solvent-based chemicals, as this alters the neutral pH balance and can damage sensitive stone.

16. What is the application temperature range?
It should be applied when ambient and surface temperatures are between +5°C and +35°C. Avoid applying on hot outdoor stone under direct sunlight.

17. Is MARMOCRYSTAL-CLEAN flammable?
No. It is a water-miscible liquid with a high flash point of > 70°C.

18. What packaging sizes are available?
MARMOCRYSTAL-CLEAN is available in 1 Litre bottles and 5 Litre heavy-duty cans.

19. What is the shelf life and proper storage condition?
It has a shelf life of 12 months in unopened original packaging stored in a cool, dry place (+5°C to +30°C) away from heat and direct sunlight.