Adhesive Name: Marmotile
Adhesive: C1 or T1
Tensile Test: ≥0.5 Mpa
Recommend Area: Indoor Floors
(Not For Wet Areas)
Recommend Surface: Screed and Plaster
Tile Size & Thickness: Upto 2x1ft
(Upto 10mm)
Tile Type: Ceramic
Stone: Not Recommended
Adhesive Thickness: Upto 12mm
Adhesive Name: Marmoflex-Eco
Adhesive: C1T or T2Tensile
Test: ≥ 1.0 Mpa
Recommend Area: Indoor Floors & Walls
(Not in Wet Areas)
Recommend Surface: Screed and Plaster
Tile Size & Thickness: Upto 2x4ft (Upto 10mm)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Upto 3x3ft
(upto 18mm – Only on Floor Application)
Adhesive Thickness: Upto 12mm
Note: Always Use Marmopoxy-Backcoat inPorous Stones for Better Results
Adhesive Name: Marmoflex
Adhesive: C1TE or T2Tensile
Test: ≥ 1.0 Mpa
Recommend Area: Indoor Floors & Walls
Recommend Surface: Screed and Plaster
Tile Size & Thickness: Upto 4x4ft
(Upto 10mm)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Upto 4X4ft
(upto 20mm – Only on Floor Application)
Adhesive Thickness: Upto 12mm
Note: Always Use Marmopoxy-Backcoat inPorous Stones for Better Results
Adhesive Name: Marmoflex-V
Adhesive: C2T or T3
Tensile Test: ≥ 1.5 Mpa
Recommend Area: Indoor Floors & Walls
(Not in Wet Area)
Recommend Surface: Screed and Plaster
Tile Size & Thickness: Upto 4X4ft
(Upto 10mm-Upto 10ft wall)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Upto 4X4ft
(upto 10ft wall)
Adhesive Thickness: Upto 12mm
Note: Always Use Marmopoxy-Backcoat in Porous Stones for Better Results
Adhesive name: Marmoflex-T
Adhesive: C2TE or T3Tensile
Test: ≥ 1.5 Mpa
Recommend Area: Indoor Floors & Walls,Outdoor floors.
(Even in Wet Areas)
Recommend Surface: Screed and Plaster
Tile Size & Thickness: Upto 4X12ft
(Upto 10mm-Upto 10ft wall)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Upto 4X4ft
(upto 20mm – Upto 10ft wall)
Adhesive Thickness: Upto 12mm
Note: Always Use Marmopoxy-Backcoat inPorous Stones for Better Results
Adhesive name: Marmoflex-S
Adhesive: C2TE or T3
Tensile Test: ≥ 1.5Mpa
Deformation: ≥ 1.5mm and < 2.5mm
Recommend Area: Indoor and Outdoor
(Even in Wet Areas)
Recommend Surface: Screed,Plaster and Boards
(Use Marmobond-Coat as primer on Boards)
Tile Size & Thickness: Upto 4X12ft
(Upto 10mm)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Upto 6X10
(upto 10ft wall)
Adhesive Thickness: Upto 12mm
Note: Always Use Marmopoxy-Backcoat in Porous Stones for Better Results
Adhesive name: Marmoflex-S1
Adhesive: C2TES1 or T4S1
Tensile Test: ≥ 1.5 Mpa
Deformation: ≥ 2.5mm and < 5mm
Recommend Area: Indoor and Outdoor
Recommend Surface: Screed,Plaster and Boards
(Use Marmobond-Coat as primer on Boards)
Tile Size & Tickness: Any Size
(Upto 12mm)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Any Size and Any Height
(upto 20mm)
Adhesive Thickness: Upto 12mm
Note: Always Use Marmopoxy-Backcoat in Porous Stones for Better Results
Adhesive name: Marmoflex-W (Two-Component)
Adhesive: C2TES2 or T4S2
Tensile Test: ≥ 1.5 Mpa
Deformation: ≥ 5mm and < 10mm
Recommend Area: Indoor and Outdoor
Recommend Surface: Screed,Plaster and Boards* (Use Marmobond-Coat as primer on Boards)
Tile Size & Thickness: Any Size (Upto 10mm)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Any Size and Any Height
(upto 20mm)
Adhesive Thickness: Upto 12mm
Note: Always Use Marmopoxy-Backcoat in Porous Stones forBetter Results
Adhesive name: Marmopoxy-Anchorfix (Two-Component)
Adhesive: R2T or T5S2
Tensile Test: ≥ 2.0Mpa
Deformation: ≥ 5mm and < 10mm
Recommend Area: Indoor and Outdoor
Recommend Surface: Screed,Plaster, Boards and Metals. Tile Size & Thickness: Any Size (Upto 10mm)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Any Size and Any Height
(upto 20mm)
Adhesive Thickness: Upto 12mm
Note: Always Use Marmopoxy-Backcoat in Porous Stones for Better Results
Adhesive name: Marmostic-T (Two-Component)
Adhesive: R2T or T5S2
Tensile Test: ≥ 2.0 Mpa
Deformation: ≥ 5mm and < 10mm
Recommend Area: Indoor and Outdoor
Recommend Surface: Screed,Plaster, Boards and Metals
Tile Size & Thickness: Any Size (Upto 12mm)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Any Size and Any Height
(upto 20mm)
Adhesive Thickness: Upto 12mm
Note: Always Use Marmopoxy-Backcoat in Porous Stones forBetter Results
Adhesive name: Marmonails (Single-Component)
Adhesive: R2T or T5S2
Tensile Test: ≥ 2.0Mpa
Deformation: ≥ 5mm and < 10mm
Recommend Area: Indoor and Outdoor
Recommend Surface: Screed,Plaster, Boards and Metals. Tile Size & Thickness: Any Size (Upto 10mm)
Tile Type: Ceramic, Vitrified and porcelain
Stone: Any Size and Any Height
(upto 20mm)
Adhesive Thickness: Upto 5mm
Note: Always Use Marmopoxy-Backcoat in Porous Stones for Better Results
