Marmomastic, a very popular product in stone adhesive and marble cleaner products is been facilitated with following features and details.
||Available in Different Colours
||Dibezoyl Peroxide (1-3%)
|Complete Curing Time
|Dry to Touch
||> 30 Minutes
By using the Marmomastic, there are following stone adhesive advantages.
Strong Adhesive Properties
Used for bonding
Quicken Production lines
Can be used on vertical surfaces
Areas of Application
As a renowned Stone Adhesive Marmomastic is being applied at different areas and stones.
Surface to be treated with Marmomastic should be free from dirt, debris, efflorescence and other loose particles.
Surface should be cleaned and slightly roughened.
Dry the surface before using adhesive.
Empty 100 grams of Part –A to every 1-3 Grams of PART B in a clean container.
Stir well to mix completely to get the bonding adhesive.Please Note :
Mixture once prepared has to be used immediately within 20-30 minutes.
Keep the surface highly ventilated during and after the application.
Maintain a temperature of 25°C to reduce curing time
Quickly run a patch test on a smaller surface to check the hardenning process. Ensure proper ventilation while applying the adhesive
Once the patch test is fine, pour the contents on the sufaceto make the bond the surface. Strike excess material to get a smooth surface.
Use standard techniques to work with the adhesive.
Wait for 30 mins after the application to polish the treated surface.
Maximum hardenning will be achieved only after 7 days of the application.
Try and keep the surface warm as it expedites the hardenning process, whereas, cold temperature retards the process.
Stability of the bond is highly dependent on the nature of the natural stone to be bonded.
Close container tightly when not in use and do not store the unused material.
Patch test recommended. Before applying on a large surface, check product performance on a smaller patch.