View My Stats

Marmomastic Gel

Marmomastic Gel

Marmomastic Gel in the categories of the best marble sealers and cleaners available in the market is colourless solution made with hardener used in it Methyl Ethyl Ketone Peroxide for the best filler effects. While its gel time is 4-5 minutes and the complete drying time is 24 hours. As a marble floor cleaner, it showcases varying tendencies to marble sealing and adhesive advantages. It for the composite industry has varying usages and activities. It has been extensively used for bonding between marble tiles and fast hardening. Quite fast hardening and highly polishable it has emerged as a leading natural marble cleaner. In comparison to other marble filler available in the market Marmomastic Gel offers an immense ease of dosing and mixing. Moreover, it is very usable at high temperature and immensely water resistant. As a leading marble cleaner Marmomastic Gel is being used at different areas and stones. The areas where it is been used is inclusive of natural stones, artificial stones, building material, travertine and the marble tiles.

Product Specifications

Marmomastic Gel, a very popular product in stone adhesive and marble cleaner products is been facilitated with following features and details.

Technical Details

Properties Results
Colour Colourless, clear
Hardner Methyl Ethyl Ketone Peroxide
Complete Drying Time 24 Hours
Gel Time 4 - 5 Minutes
Stackability 10 - 30 Minutes
Workability 24 Hours


By using the Marmomastic Gel, there are following stone adhesive advantages.

  • Used for bonding
  • Fast Hardenning
  • Highly polishable
  • Ease of dosing and mixing
  • Usable at high temperature
  • Water resistant
  • Petrol and Oil resistant
  • Good Adhesive of Natural Stone

Areas of Application

As a renowned Stone Adhesive Marmomastic Gel is being applied at different areas and stones.

  • Natural Stones
  • Artificial Stones
  • Building Material
  • Travertine
  • Marble

Surface Preparation

  • Surface should be free from dirt, debris, efflorescence and other loose particles.
  • Surface should be cleaned and slightly roughened
  • Dry the surface before using adhesive.
  • The adhesive can not be used on wet or damp surfaces as it doesn't allow the surface to dry completely.

Mixture Preparations

  • Empty 100 grams of Part - A to every 2-4 grams of Part B in a clean container.
  • Stir well to mix completly to get a neuteral colour glueing adhesive.
  • Please Note :
  • Mixture once prepared has to be used immediately within 20-30 minutes
  • Maintain a temperature of 25°C while working with Marmomastic gel.

Quickly run a patch test on a smaller surface to check the hardenning process. Ensure proper ventilation while applying the adhesive


  • Once the patch test is fine, pour the contents on the suface to make the surface hard. Strike excess material to get a smooth surface.
  • Use standard techniques to work with the adhesive.
  • Wait for 6 - 8 hours after the application to achieve desired bond.
  • Maximum hardenning will be achieved only after 7 days of the application.
  • Try and keep the surface warm as it expedites the hardenning process, whereas, cold temperature retards the process.


  • Stability of the bond is highly dependent on the nature of the natural stone to be bonded.
  • Close container tightly when not in use and do not store the unused material.
  • Patch test recommended. Before applying on a large surface, check product performance on a smaller patch